• 4 ports support 51V DC power to PoE powered device
• Complies with IEEE 802.3af/at Power over Ethernet end-span + mid-span PSE
• Up to 4 IEEE 802.3af/2 IEEE 802.3at devices powered
| Hardware Version | 2 |
|---|---|
| Network Connector | 5-port RJ45 for 10/100BASE-TX, auto MDI/MDIX |
| PoE Inject Port | 4-port with 802.3af/at PoE injector function (Port 1 to Port 4) |
| LED Display | System: Power (Green) Per PoE port: PoE (Green, Port 1 to Port 4) LNK/ACT (Green, Port 1 to Port 5) |
| Switch Architecture | Store and Forward switch architecture |
| MAC Address Table | 1K MAC address table with auto learning function |
| Switch Fabric | 1Gbps |
| Switch Throughput | 0.74Mpps @64bytes |
| Maximum Packet Size | 1536bytes |
| Flow Control | Back pressure for half-duplex; IEEE 802.3x pause frame for full-duplex |
| Power Consumption | Max. 63 watts, 214 BTU |
| Dimensions (W x D x H) | 100 x 100 x 26mm |
| Weight | 257g |
| PoE Standard | IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE |
| PoE Power Supply Type | End-span + mid-span |
| Power Pin Assignment | 1/2 (+), 4/5(+), 3/6(-), 7/8(-) |
| PoE Power Output | Per port 51V DC, 300mA. max. 15.4 watts (IEEE 802.3af) Per port 51V DC, 600mA. max. 30 watts (IEEE 802.3at) |
| PoE Power Budget | 60 watts |
| Number of PDs, 7 watts | 4 |
| Number of PDs, 15.4 watts | 4 |
| Number of PDs, 30 watts | 2 |
| EMI Safety | FCC Class A, CE |
| Standard Compliance | IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3af IEEE 802.3at Ethernet Fast Ethernet Flow Control Power over Ethernet Power over Ethernet Plus |
| Operating Environment | 0 ~ 50 degrees C |
| Storage Environment | -10 ~ 70 degrees C |
| Operating Humidity | 5 ~ 95%, relative humidity, non-condensing |
| Storage Humidity | 5 ~ 95%, relative humidity, non-condensing |
